Inductive Proximity Switches
with Analog Output

Factory calibrated sensors with
digital signal processing lead into
absolutely linear output functions.

Error <1 ‰

Capacitive Proximity Switches

with chemical resistant
PTFE housings available

Multiple Color LED Beacons

□ Zinc or Food-Grade Stainless
□ up to 7 Templates, each with
1 of 7 bright and uniform colors
1 of 7 self generated blink patterns
1 of 5 unique sounds
□ Power or low-current inputs
□ Device to Device Synchonization
Also with IO-Link®

Electronic Buttons

□ Pressure or Touch Sensitive
□ No Moving Parts - 100% Solid State
□ Fully Static Operation
□ Vandalism Proof - All Stainless
□ Food-Grade Hygienic Design available
□ Access both LED colors directly

High Resolution Area Sensors

□ Up to 576 crossed beams at 300 mm
□ Transmitter with muting input available

Engineering & production
at XECRO
in Hanover, Germany

Multi-Color LED-Indicators - Signal Dome, Ø60 mm
Inputs enabled
Brown
Black
White
Mode:
Power-Inputs, No Sync
First color
Second color
Blink Pattern
First Sound
Second Sound
Inputs enabled
Brown
Black
White
Mode:
Power-Inputs, No Sync
First color
Second color
Blink Pattern
First Sound
Second Sound
Inputs enabled
Brown
Black
White
Mode:
Power-Inputs, No Sync
First color
Second color
Blink Pattern
First Sound
Second Sound
Inputs enabled
Brown
Black
White
Mode:
Power-Inputs, No Sync
First color
Second color
Blink Pattern
First Sound
Second Sound
Inputs enabled
Brown
Black
White
Mode:
Power-Inputs, No Sync
First color
Second color
Blink Pattern
First Sound
Second Sound
Inputs enabled
Brown
Black
White
Mode:
Power-Inputs, No Sync
First color
Second color
Blink Pattern
First Sound
Second Sound
Inputs enabled
Brown
Black
White
Mode:
Power-Inputs, No Sync
First color
Second color
Blink Pattern
First Sound
Second Sound
Generate code
Inputs enabled
Brown
Black
White
Mode:
LC-Inputs, No Sync
First color
Second color
Blink Pattern
First Sound
Second Sound
Inputs enabled
Brown
Black
White
Mode:
LC-Inputs, No Sync
First color
Second color
Blink Pattern
First Sound
Second Sound
Inputs enabled
Brown
Black
White
Mode:
LC-Inputs, No Sync
First color
Second color
Blink Pattern
First Sound
Second Sound
Inputs enabled
Brown
Black
White
Mode:
LC-Inputs, No Sync
First color
Second color
Blink Pattern
First Sound
Second Sound
Generate code
Inputs enabled
Brown
Black
White
Mode:
Power-Inputs with Sync
First color
Second color
Blink Pattern
First Sound
Second Sound
Inputs enabled
Brown
Black
White
Mode:
Power-Inputs with Sync
First color
Second color
Blink Pattern
First Sound
Second Sound
Inputs enabled
Brown
Black
White
Mode:
Power-Inputs with Sync
First color
Second color
Blink Pattern
First Sound
Second Sound
Generate code
Inputs enabled
Brown
Black
White
Mode:
LC-Inputs with Sync
First color
Second color
Blink Pattern
First Sound
Second Sound
Inputs enabled
Brown
Black
White
Mode:
LC-Inputs with Sync
First color
Second color
Blink Pattern
First Sound
Second Sound
Generate code

These compact and flexible to use Multi-Color LED-Indicators can show up to 7 different colors, blink patterns and sounds. The assignment between pin combination, color and blink pattern respectively sound, is made by using the on-line configurator we’re showing below on this page. A configuration, that is being transmitted while placing an order, is used by us to pre-program the device during production.

    The indicators will be delivered ready for installation.

There are models with Power- as well as Low-Current-Inputs available. A model with power-inputs, is supplied by the input that is used to address the color and blink pattern. Therefore, the control output must be able to provide its full operating current. A model with Low-Current-inputs, is permanently supplied by pin 1 (Brown). The remaining 3V-tolerant inputs are used to select the color and blink pattern.

Electric Connection

If multiple indicators are used to signalize the same event, devices with synchronization functionality show their blink patterns absolutely simultaneously. This results to a uniform signaling even across large plant areas.
Sychronization takes place by simply wiring all sync-pins (4, BK) together; no external sync-impulse is required.


Blink Patterns LED Colors
– permanent – Red
– blinking slow – Green
– blinking med – Blue
– blinking fast – Yellow
– burst slow – Magenta
– burst double – Cyan
– burst fast – White

The product selector is used to determine products with particular features. The assistant guides you through a selection of specifications that may be essential for the application. The product selector also gives additional information about specific products which are not part of this overview (for instance 2D and 3D drawings, data sheets, IODD-files et cetera).

Start Product Selector

Common Specifications

Features

  • Multiple color- and blink-combinations in one device

  • Built-in blink generator with 7 pre-defined patterns

  • Model with Power- or Low-Current inputs

  • Very bright and uniform indicator light

  • Metal housings and break-proof polycarbonate

Benefits

  • Replaces multiple indicator lights by a single one

  • No programming or configuring by PLCs required

  • Supports also control systems with 5 V or 3.3 V logic

  • Compact appearance, clearly visible from front and side

  • Robust construction for a long lifetime

Common Specifications

Operating Voltage

15… 35 VDC

Reverse Polarity Protection

Built-in

Current Consumption

< 30 mA @ 24 V

Indicator Type

High-Efficient LED

Input Response Time

< 10 ms

Input Threshold (Power-Inputs)

on = Vcc x 0.6, off = Vcc x 0.4

Input Threshold (Low-Current Inputs)

on = 2.5 V, off = 1 V

Operating Temperature

-40… +50 °C | -40… 122 °F

Protection Class

IP67

Illuminated Material

Polycarbonate

Housing Material

Nickel Plated Brass

Lost Password?