Inductive Proximity Switches
with Analog Output

Factory calibrated sensors with
digital signal processing lead into
absolutely linear output functions.

Error <1 ‰

Capacitive Proximity Switches

with chemical resistant
PTFE housings available

Multiple Color LED Beacons

□ Zinc or Food-Grade Stainless
□ up to 7 Templates, each with
1 of 7 bright and uniform colors
1 of 7 self generated blink patterns
1 of 5 unique sounds
□ Power or low-current inputs
□ Device to Device Synchonization
Also with IO-Link®

Electronic Buttons

□ Pressure or Touch Sensitive
□ No Moving Parts - 100% Solid State
□ Fully Static Operation
□ Vandalism Proof - All Stainless
□ Food-Grade Hygienic Design available
□ Access both LED colors directly

High Resolution Area Sensors

□ Up to 576 crossed beams at 300 mm
□ Transmitter with muting input available

Engineering & production
at XECRO
in Hanover, Germany

Multi-Color LED-Indicators
Signal Dome, Ø60 mm

These compact and flexible to use Multi-Color LED-Indicators can show up to 7 different colors, blink patterns and sounds. The assignment between pin combination, color and blink pattern respectively sound, is made by using the on-line configurator we’re showing below on this page. A configuration, that is being transmitted while placing an order, is used by us to pre-program the device during production.

    The indicators will be delivered ready for installation.

Common Specifications

Panel Mount, Ø22 mm

These very flexible to use Multi-Color LED-Indicators can show up to 7 different colors and blink patterns. The assignment between pin combination, color and blink pattern, is made by using the on-line configurator we’re showing below on this page. A configuration, that is being transmitted while placing an order, is used by us to pre-program the device during production.

    The indicators will be delivered ready for installation.

Common Specifications

Field Mount, M18 | M30

These very flexible to use Multi-Color LED-Indicators can show up to 7 different colors and blink patterns. The assignment between pin combination, color and blink pattern, is made by using the on-line configurator we’re showing below on this page. A configuration, that is being transmitted while placing an order, is used by us to pre-program the device during production.

    The indicators will be delivered ready for installation.

Common Specifications

Lost Password?